Submissions from 2004
CFD Studies on a Large Diameter Jet Impingement Flow, Zhiguo Zhang and Mounir B. Ibrahim
Development of CFD Model for Stirling Engine and its Components, Zhiguo Zhang and Mounir B. Ibrahim
Submissions from 2003
The Effect of Thermal Mismatch on Stresses, Morphology and Failures in Thermal Barrier Coatings, J. Shi, S. Darzens, and Anette M. Karlsson
Simulated Properties of Kagomé and Tetragonal Truss Core Panels, S. Hyun, Anette M. Karlsson, S. Torquato, and A. G. Evans
Development and Validation of a 3-D Model to Predict Knee Joint Loading During Dynamic Movement, Scott G. McLean, Anne Su, and Antonie J. van den Bogert
On the Mechanical Response in a Thermal Barrier System Due to Martensitic Phase Transformation in the Bond Coat, Anette M. Karlsson
Special Issue on Durability and Damage Tolerance of Heterogeneous Materials and Structures - Foreward, A. A. Pelegri and Anette M. Karlsson
Vibration Based Crack Detection in a Rotating Disk: Part 1—An Analytical Study, Andrew L. Gyekenyesi, Jerzy T. Sawicki, and George Y. Baaklini
Dynamic Coefficient Prediction in Multi-lobe Journal Bearings Using a Mass Conservation Algorithm, T.V.V.L. N. Rao and Jerzy T. Sawicki
The Displacement of the Thermally Grown Oxide in Thermal Barrier Systems Upon Temperature Cycling, Anette M. Karlsson, J. W. Hutchinson, and A. G. Evans
Development of Morphology and Stresses in a Class of Thermal Barrier Systems During Thermal Cycling, Anette M. Karlsson
Thermomechanical Behavior of Rotor with Rubbing, Jerzy T. Sawicki, Alberto Montilla-Bravo, and Zdzislaw Gosiewski
Submissions from 2002
An Intelligent System for Monitoring the Microgravity Environment Quality On-Board the International Space Station, Paul P. Lin and Kenol Jules
Linear Stability Analysis for a Hydrodynamic Journal Bearing Considering Cavitation Effects, T.V.V.L. N. Rao and Jerzy T. Sawicki
Comment on "Quadriceps Protects the Anterior Cruciate Ligament", Antonie J. van den Bogert
A Fundamental Model of Cyclic Instabilities in Thermal Barrier Systems, Anette M. Karlsson, J. W. Hutchinson, and A. G. Evans
A Model Study of Displacement Instabilities during Cyclic Oxidation, Anette M. Karlsson, C. G. Levi, and A. G. Evans
The Effect of the Thermal Barrier Coating on the Displacement Instability in Thermal Barrier Systems, Anette M. Karlsson, T. Xu, and A. G. Evans
Response Time is More Important than Walking Speed for the Ability of Older Adults to Avoid a Fall after a Trip, Antonie J. van den Bogert, M. J. Pavol, and M. D. Grabiner
Tools for Engine Diagnostics under the NASA Aviation Safety Program, George Y. Baaklini, Andrew L. Gyekenyesi, K. D. Smith, Jerzy T. Sawicki, and L. Brasche
Humanoid Humeral Pointing Kinematics, Jadran Lenarčič, Michael Stanišić, and Eric M. Schearer
Comparison of Mobility Method and Mass Conservation Method in a Study of Dynamically Loaded Journal Bearings, Biao Yu and Jerzy T. Sawicki
Submissions from 2001
Horses Damp the Spring in Their Step, Alan M. Wilson, M. Polly McGuigan, Anne Su, and Antonie J. van den Bogert
Model Formulation and Determination of in Vitro Parameters of a Noninvasive Method to Calculate Flexor Tendon Forces in the Equine Forelimb, Liduin S. Meershoek, Antonie J. van den Bogert, and Henk C. Schamhardt
On the Number and Placement of Accelerometers for Angular Velocity and Acceleration Determination, Bruno Zappa, Giovanni Legnani, Antonie J. van den Bogert, and Riccardo Adamini
Modal Uncoupling of Damped Gyroscopic Systems, Jerzy T. Sawicki and G. Genta
Nonlinear Prediction of Rotordynamic Coefficients For a Hydrodynamic Journal Bearing, Jerzy T. Sawicki and T.V.V.L. N. Rao
A Numerical Model for the Cyclic Instability of Thermally Grown Oxides in Thermal Barrier Systems, Anette M. Karlsson and A. G. Evans
Modeling Nonlinear Behavior in a Piezoelectric Actuator, Hanz Richter, Eduardo A. Misawa, D. A. Lucca, and H. Lu
Effects of Shoe Sole Construction on Skeletal Motion During Running, Alex Stacoff, Christoph Reinschmidt, Benno M. Nigg, Antonie J. van den Bogert, Arne Lundberg, Jachen Denoth, and Edgar Stüssi
In-vivo 3D Motion Estimation of the Shoulder Joint Utilizing Magnetic Resonance Imaging During a Simulated Push Task, D. M. Magnusson, Antonie J. van den Bogert, and J. L. Ronsky
Submissions from 2000
Contributions of Proximal and Distal Moments to Axial Tibial Rotation During Walking and Running, T. L. Bellchamber and Antonie J. van den Bogert
Tibiocalcaneal Kinematics of Barefoot Versus Shod Running, Alex Stacoff, Benno M. Nigg, Christoph Reinschmidt, Antonie J. van den Bogert, and Arne Lundberg
The Effects of Patch Properties on the Debonding Behavior of Patched Beam-Plates, Anette M. Karlsson
The Influence of Orthotic Devices and Vastus Medialis Strength and Timing on Patellofemoral Loads During Running, R. R. Neptune, I. C. Wright, and Antonie J. van den Bogert
On Thermal Buckling of Patched Beam-Plates, Anette M. Karlsson and W. J. Bottega
Thermo-Mechanical Response of Patched Plates, Anette M. Karlsson and W. J. Bottega
On the Behavior of a Class of Patched Plates During Cooling, Anette M. Karlsson and W. J. Bottega
The Influence of Foot Positioning on Ankle Sprains, I. C. Wright, R. R. Neptune, Antonie J. van den Bogert, and B. M. Nigg
Quantification of in Vivo ACL Elongation During Dynamic Joint Movements: A New Methodology, Scott G. McLean and Antonie J. van den Bogert
Movement Coupling at the Ankle During the Stance Phase of Running, Alex Stacoff, Benno M. Nigg, Christoph Reinschmidt, Antonie J. van den Bogert, Arne Lundberg, Edgar Stüssi, and Jachen Denoth
The Effects of Ankle Compliance and Flexibility on Ankle Sprains, Ian C. Wright, Richard R. Neptune, Antonie J. van den Bogert, and Benno M. Nigg
Structural Damage Detection Using Modal Norms, W. Gawronski and Jerzy T. Sawicki
A Numerical Model of Ratcheting in Thermal Barrier Systems, Anette M. Karlsson and Anthony G. Evans
Effects of Foot Orthoses on Skeletal Motion During Running, A. Stacoff, C. Reinschmidt, B. M. Nigg, Antonie J. van den Bogert, A. Lundberg, J. Denoth, and E. Stüssi
Submissions from 1999
Analysis of Elastic Distortions of a Piston Ring in the Reciprocating Air Brake Compressor Due to the Installation Stresses, V. Dunaevsky, Jerzy T. Sawicki, J. Frater, and H. Chen
Analytical Solution of Piston Ring Pack Lubrication for Truck Air Brake Compressor, Biao Yu, Jerzy T. Sawicki, and V. Dunaevsky
Analytical Solutions of Piston Ring Lubrication Using Mass Conserving Cavitation Algorithm, Jerzy T. Sawicki and Biao Yu
On the Detachment of Step-Tapered Doublers : Part 1—Foundations, W. J. Bottega and Anette M. Karlsson
On-Line Free Form Surface Measurement Via a Fuzzy-Logic Controlled Scanning Probe, Ming Chang and Paul P. Lin
On the Detachment of Step-Tapered Doublers: Part 2—Evolution of Pressure Loaded Structures, Anette M. Karlsson and W. J. Bottega
Frequency Driven Phasic Shifting and Elastic-Hysteretic Partitioning Properties of Fractional Mechanical System Representation Schemes, Jerzy T. Sawicki and Joe Padovan
Aspects of the Failure of Patched Structures, Anette M. Karlsson
Modeling the Debonding Behavior of Step-tapered Patches: Analytical Solutions and Numerical Analysis of Selected Structures, Anette M. Karlsson
The Presence of Edge Contact and its Influence on the Debonding of Patched Panels, Anette M. Karlsson and W. J. Bottega
The Dynamics of Rotor with Rubbing, Jerzy T. Sawicki, Joe Padovan, and Rabih Al-Khatib
An Analysis of Hip Joint Loading During Walking, Running, and Skiing, Antonie J. van den Bogert, Lynda Read, and Benno M. Nigg
Submissions from 1998
Static and Dynamic Analysis of Bearings for Truck Brake Compressor, Biao Yu, Jerzy T. Sawicki, and V. Dunaevsky
Computer-Assisted Gait Analysis in Equine Orthopaedic Practice: The Case for Inverse Dynamic Analysis, Antonie J. van den Bogert
Nonlinear Vibrations of Fractionally Damped Systems, Joe Padovan and Jerzy T. Sawicki
Mechanical Properties of the Tendinous Equine Interosseus Muscle are Affected by in Vivo Transducer Implantation, M. O. Jansen, H. C. Schamhardt, Antonie J. van den Bogert, and W. Hartman
Diophantinized Fractional Representations for Nonlinear Elastomeric Media, Joe Padovan and Jerzy T. Sawicki
Comments on Response Errors of Non-proportionally Lightly Damped Structures, W. Gawronski and Jerzy T. Sawicki
Submissions from 1997
Balanced Model Reduction and Control of Rotor-Bearing Systems, Jerzy T. Sawicki and W. Gawronski
Response Errors of Nonproportionally Lightly Damped Structures, W. Gawronski and Jerzy T. Sawicki
Balanced Dissipative Controllers for Flexible Structures, W. Gawronski and Jerzy T. Sawicki
Diophantine Type Fractional Derivative Representation of Structural Hysteresis, Part I: Formulation, Joe Padovan and Jerzy T. Sawicki
Thermodynamic Properties of Fractional Differ-Integro Type Constitutive Relations, Joe Padovan, Jerzy T. Sawicki, and Arkadi Leonov
Experimental and Theoretical Rotordynamic Characteristics of a Hybrid Journal Bearing, Jerzy T. Sawicki, R. J. Capaldi, and M. L. Adams
Diophantine Type Fractional Derivative Representation of Structural Hysteresis, Part II: Fitting, Computational Mechanics, Jerzy T. Sawicki and Joe Padovan
Submissions from 1996
Noncontact Sphericity Measurement by Means of Phase Shift Interferometry, Ming Chang and Paul P. Lin
System Identification Methods for Dynamic Testing of Fluid-Film Bearings, Jerzy T. Sawicki, M. L. Adams, and R. J. Capaldi
Submissions from 1994
Optical Technique for Measuring Tire Deformation and Strains, Paul P. Lin, Mangal D. Chawla, and Paul C. Ulrich
A Fringe Center Detection Technique Based on a Sub-Pixel Resolution, and Its Applications Using Sinusoidal Gratings, Ming Chang, Paul P. Lin, and Wen Chih Tai
Oscillating Flow in Channels with Sudden Change in Cross Section, Mounir B. Ibrahim and Waqar Hashim
Submissions from 1993
A Kalina Cycle Application for Power Generation, Mounir B. Ibrahim and Ronald M. Kovach
Tolerance Specification of Robot Kinematic Parameters Using an Experimental Design Technique, Y.H. Andrew Liou, Paul P. Lin, Richard R. Lindeke, and Hsiang-Dih Chiang
Submissions from 1992
Laminar/Turbulent Oscillating Flow in Circular Pipes, Kyung H. Ahn and Mounir B. Ibrahim
An Efficient Technique for Finding the Desired Global Optimum of Robotic Joint Displacement, Paul P. Lin and An-Jen J. Yang
Comparison of Analysis and Experiment for Gearbox Noise, Fred B. Oswald, A. F. Seybert, T. W. Wu, and William J. Atherton
Effect of Operating Conditions on Gearbox Noise, Fred B. Oswald, James J. Zakrajsek, Dennis P. Townsend, William Atherton, and Hsiang Hsi Lin
Submissions from 1991
An Improved Method for Online Calculation and Compensation of the Static Deflection at a Robot End-Effector, Paul P. Lin, Hsiang-Dih Chiang, and Xiu Xun Cui
Submissions from 1990
Data Communication Between an Expert System Shell and a Conventional Algorithmic Program With Application to Cam Motion Specification, Paul P. Lin and An-Jen Yang
Asymptotic Boundary-Layer Solutions for Mixed Convection from a Vertical Surface in a Micropolar Fluid, Rama Subba Reddy Gorla, Paul P. Lin, and An-Jen J. Yang
Submissions from 1988
Inverse Problem Solutions Via Plate-Theory With Applications to Position and Force Sensing, Paul P. Lin and Philip Datseris
Submissions from 1987
A Turbulence Model for the Heat Transfer Near Stagnation Point of a Circular Cylinder, Mounir B. Ibrahim
Automated Acoustic Intensity Measurements and the Effect of Gear Tooth Profile on Noise, William J. Atherton, Adam Pintz, and David G. Lewicki
