Submissions from 2000
Quantification of in Vivo ACL Elongation During Dynamic Joint Movements: A New Methodology, Scott G. McLean and Antonie J. van den Bogert
Movement Coupling at the Ankle During the Stance Phase of Running, Alex Stacoff, Benno M. Nigg, Christoph Reinschmidt, Antonie J. van den Bogert, Arne Lundberg, Edgar Stüssi, and Jachen Denoth
The Effects of Ankle Compliance and Flexibility on Ankle Sprains, Ian C. Wright, Richard R. Neptune, Antonie J. van den Bogert, and Benno M. Nigg
Structural Damage Detection Using Modal Norms, W. Gawronski and Jerzy T. Sawicki
A Numerical Model of Ratcheting in Thermal Barrier Systems, Anette M. Karlsson and Anthony G. Evans
A Method for Numerical Simulation of Single Limb Ground Contact Events: Application to Heel-Toe Running, R. R. Neptune, I. C. Wright, and A. J. Van Den Bogert
Effects of Foot Orthoses on Skeletal Motion During Running, A. Stacoff, C. Reinschmidt, B. M. Nigg, Antonie J. van den Bogert, A. Lundberg, J. Denoth, and E. Stüssi
Submissions from 1999
Analysis of Elastic Distortions of a Piston Ring in the Reciprocating Air Brake Compressor Due to the Installation Stresses, V. Dunaevsky, Jerzy T. Sawicki, J. Frater, and H. Chen
Analytical Solution of Piston Ring Pack Lubrication for Truck Air Brake Compressor, Biao Yu, Jerzy T. Sawicki, and V. Dunaevsky
Analytical Solutions of Piston Ring Lubrication Using Mass Conserving Cavitation Algorithm, Jerzy T. Sawicki and Biao Yu
On the Detachment of Step-Tapered Doublers : Part 1—Foundations, W. J. Bottega and Anette M. Karlsson
On-Line Free Form Surface Measurement Via a Fuzzy-Logic Controlled Scanning Probe, Ming Chang and Paul P. Lin
On the Detachment of Step-Tapered Doublers: Part 2—Evolution of Pressure Loaded Structures, Anette M. Karlsson and W. J. Bottega
Frequency Driven Phasic Shifting and Elastic-Hysteretic Partitioning Properties of Fractional Mechanical System Representation Schemes, Jerzy T. Sawicki and Joe Padovan
Aspects of the Failure of Patched Structures, Anette M. Karlsson
Modeling the Debonding Behavior of Step-tapered Patches: Analytical Solutions and Numerical Analysis of Selected Structures, Anette M. Karlsson
The Presence of Edge Contact and its Influence on the Debonding of Patched Panels, Anette M. Karlsson and W. J. Bottega
The Dynamics of Rotor with Rubbing, Jerzy T. Sawicki, Joe Padovan, and Rabih Al-Khatib
An Analysis of Hip Joint Loading During Walking, Running, and Skiing, Antonie J. van den Bogert, Lynda Read, and Benno M. Nigg
Submissions from 1998
Static and Dynamic Analysis of Bearings for Truck Brake Compressor, Biao Yu, Jerzy T. Sawicki, and V. Dunaevsky
Computer-Assisted Gait Analysis in Equine Orthopaedic Practice: The Case for Inverse Dynamic Analysis, Antonie J. van den Bogert
Nonlinear Vibrations of Fractionally Damped Systems, Joe Padovan and Jerzy T. Sawicki
Mechanical Properties of the Tendinous Equine Interosseus Muscle are Affected by in Vivo Transducer Implantation, M. O. Jansen, H. C. Schamhardt, Antonie J. van den Bogert, and W. Hartman
Diophantinized Fractional Representations for Nonlinear Elastomeric Media, Joe Padovan and Jerzy T. Sawicki
Comments on Response Errors of Non-proportionally Lightly Damped Structures, W. Gawronski and Jerzy T. Sawicki
Submissions from 1997
Balanced Model Reduction and Control of Rotor-Bearing Systems, Jerzy T. Sawicki and W. Gawronski
Response Errors of Nonproportionally Lightly Damped Structures, W. Gawronski and Jerzy T. Sawicki
Balanced Dissipative Controllers for Flexible Structures, W. Gawronski and Jerzy T. Sawicki
Diophantine Type Fractional Derivative Representation of Structural Hysteresis, Part I: Formulation, Joe Padovan and Jerzy T. Sawicki
Thermodynamic Properties of Fractional Differ-Integro Type Constitutive Relations, Joe Padovan, Jerzy T. Sawicki, and Arkadi Leonov
Experimental and Theoretical Rotordynamic Characteristics of a Hybrid Journal Bearing, Jerzy T. Sawicki, R. J. Capaldi, and M. L. Adams
Diophantine Type Fractional Derivative Representation of Structural Hysteresis, Part II: Fitting, Computational Mechanics, Jerzy T. Sawicki and Joe Padovan
Submissions from 1996
Noncontact Sphericity Measurement by Means of Phase Shift Interferometry, Ming Chang and Paul P. Lin
System Identification Methods for Dynamic Testing of Fluid-Film Bearings, Jerzy T. Sawicki, M. L. Adams, and R. J. Capaldi
Submissions from 1994
Optical Technique for Measuring Tire Deformation and Strains, Paul P. Lin, Mangal D. Chawla, and Paul C. Ulrich
A Fringe Center Detection Technique Based on a Sub-Pixel Resolution, and Its Applications Using Sinusoidal Gratings, Ming Chang, Paul P. Lin, and Wen Chih Tai
Oscillating Flow in Channels with Sudden Change in Cross Section, Mounir B. Ibrahim and Waqar Hashim
Submissions from 1993
A Kalina Cycle Application for Power Generation, Mounir B. Ibrahim and Ronald M. Kovach
Tolerance Specification of Robot Kinematic Parameters Using an Experimental Design Technique, Y.H. Andrew Liou, Paul P. Lin, Richard R. Lindeke, and Hsiang-Dih Chiang
Submissions from 1992
Laminar/Turbulent Oscillating Flow in Circular Pipes, Kyung H. Ahn and Mounir B. Ibrahim
An Efficient Technique for Finding the Desired Global Optimum of Robotic Joint Displacement, Paul P. Lin and An-Jen J. Yang
Comparison of Analysis and Experiment for Gearbox Noise, Fred B. Oswald, A. F. Seybert, T. W. Wu, and William J. Atherton
Effect of Operating Conditions on Gearbox Noise, Fred B. Oswald, James J. Zakrajsek, Dennis P. Townsend, William Atherton, and Hsiang Hsi Lin
Submissions from 1991
An Improved Method for Online Calculation and Compensation of the Static Deflection at a Robot End-Effector, Paul P. Lin, Hsiang-Dih Chiang, and Xiu Xun Cui
Submissions from 1990
Data Communication Between an Expert System Shell and a Conventional Algorithmic Program With Application to Cam Motion Specification, Paul P. Lin and An-Jen Yang
Asymptotic Boundary-Layer Solutions for Mixed Convection from a Vertical Surface in a Micropolar Fluid, Rama Subba Reddy Gorla, Paul P. Lin, and An-Jen J. Yang
Submissions from 1988
Inverse Problem Solutions Via Plate-Theory With Applications to Position and Force Sensing, Paul P. Lin and Philip Datseris
Submissions from 1987
A Turbulence Model for the Heat Transfer Near Stagnation Point of a Circular Cylinder, Mounir B. Ibrahim
Automated Acoustic Intensity Measurements and the Effect of Gear Tooth Profile on Noise, William J. Atherton, Adam Pintz, and David G. Lewicki
