Submissions from 2009
Mechanics-based Analysis of Selected Features of the Exoskeletal Microstructure of Popillia Japonica, Liang Cheng, Liyun Wang, and Anette M. Karlsson
Computational Simulation of Cylindrical Film Hole with Jet Pulsation on Flat Plates, Olga Kartuzova, Daniel Danila, Mounir B. Ibrahim, and Ralph J. Volino
Computational Modeling of a Segmented-Involute-Foil Regenerator for Stirling Engines, Mounir B. Ibrahim, Daniel Danila, Terrence W. Simon, David Gedeon, and Roy Tew
Cracked Rotor Detection by Recurrence Plots, Grzegorz Litak, Jerzy T. Sawicki, and Rafał Kaspereka
An Elaborate Data Set Characterizing the Mechanical Response of the Foot, Ahmet Erdemir, Pavana A. Sirimamilla, Jason P. Halloran, and Antonie J. van den Bogert
On TGO Creep and the Initiation of a Class of Fatigue Cracks in Thermal Barrier Coatings, Mercedes T. Hernandez, Anette M. Karlsson, and Marion Bartsch
Comment on "A Stochastic Biomechanical Model for Risk and Risk Factors of Non-Contact Anterior Cruciate Ligament Injuries", Antonie J. van den Bogert and Scott G. McLean
Assessing Vaginal Surgical Skills Using Video Motion Analysis, Gouri B. Diwadkar, Antonie J. van den Bogert, Matthew D. Barber, and J. Eric Jelovsek
Crack Identification by Multifractal Analysis of a Dynamic Rotor Response, Grzegorz Litak and Jerzy T. Sawicki
Assessing Plastically Dissipated Energy as a Condition for Fatigue Crack Growth, D. Cojocaru and Anette M. Karlsson
Feasibility of Piezoelectric Actuation with a Reduced Number of Drivers: A Periodic Control Approach, Hanz Richter
A Microfabricated Segmented-Involute-Foil Regenerator for Enhancing Reliability and Performance of Stirling Engines: Phase III Final Report for the Radioisotope Power Conversion Technology NRA Contract NAS3-03124, Mounir B. Ibrahim, David Gedeon, Gary Wood, and Jeffrey McLean
Mechanics-Based Model for Non-Affine Swelling in Perfluorosulfonic Acid (PFSA) Membranes, Ahmet Kusoglu, Michael H. Santare, and Anette M. Karlsson
A Real-Time, 3-D Musculoskeletal Model for Dynamic Simulation of Arm Movements, Edward K. Chadwick, Dimitra Blana, Antonie J. van den Bogert, and Robert F. Kirsch
Stress-Strain Behavior of Perfluorosulfonic Acid Membranes at Various Temperatures and Humidities: Experiments and Phenomenological Modeling, Ahmet Kusoglu, Yaliang Tang, Michael Santare, Anette M. Karlsson, Simon Cleghorn, and William B. Johnson
On Stresses Induced in a Thermal Barrier Coating Due to Indentation Testing, Jin Yan, Anette M. Karlsson, Marion Bartsch, and Xi Chen
Gait Prediction Using Concurrent Musculoskeletal Control and FE Simulations, Jason P. Halloran, Marko Ackermann, Ahmet Erdemir, and Antonie J. van den Bogert
Adaptive Surrogate Modeling for Efficient Coupling of Musculoskeletal Control and Tissue Deformation Models, Jason P. Halloran, Ahmet Erdemir, and Antonie J. van den Bogert
Concurrent Simulation of Neuromuscular Control and Tissue Deformation is Possible by Adaptive Surrogate Modeling, Jason P. Halloran, Ahmet Erdemir, and Antonie J. van den Bogert
LES and URANS Computational Investigations of LPT Blade (L1A) Separation Control using Vortex Generator Jets, Mounir B. Ibrahim, Olga Kartuzova, and R. J. Volino
Composites, Multifunctional, Anette M. Karlsson and Mosobalaje O. Adeoye
Multiresolution Wavelet Analysis of the Dynamics of a Cracked Rotor, Jerzy T. Sawicki, Asok K. Sen, and Grzegorz Litak
An Elaborate Data Set for Mechanical Characterization of the Foot, Pavana Sirimamilla, Ahmet Erdemir, Antonie J. van den Bogert, and Jason P. Halloran
Thermo-fluid Experiments Supporting Microfabricated Regenerator Development for a Stirling Space Power Engine, Liyong Sun, Terrance W. Simon, Susan C. Mantell, Mounir B. Ibrahim, David Gedeon, and Roy Tew
Application of the Actor-Critic Architecture to Functional Electrical Stimulation Control of a Human Arm, Philip Thomas, Michael Branicky, Antonie van den Bogert, and Kathleen Jagodnik
Evaluation of a System for Real-Time Analysis of Muscle Function: Shoulder and Elbow Muscles, Antonie J. van den Bogert, Thomas Geijtenbeek, and Oshri Even-Zohar
Experimental and Computational Investigations of Low-Pressure Turbine Separation Control Using Vortex Generator Jets, Ralph J. Volino, Olga Kartuzova, and Mounir B. Ibrahim
Submissions from 2008
An Object-Oriented Approach for Modeling and Simulation of Crack Growth in Cyclically Loaded Structures, D. Cojocaru and Anette M. Karlsson
Micromechanics Model Based on the Nanostructure of PFSA Membranes, Ahmet Kusoglu, Michael H. Santare, Anette M. Karlsson, William B. Johnson, and Simon Cleghorn
Image Analyses of Two Crustacean Exoskeletons and Implications of the Exoskeletal Microstructure on the Mechanical Behavior, Liang Cheng, Liyun Wang, and Anette M. Karlsson
Closure to “Discussion: ‘On the Reference Length and Mode Mixity for a Bimaterial Interface’ ” (2008, ASME J. Eng. Mater. Technol., 130, p. 045501), Anette M. Karlsson
Rotor Crack Detection Using Active Magnetic Bearings, Jerzy T. Sawicki
On Cracks and Delaminations of Thermal Barrier Coatings Due to Indentation Testing: Experimental Investigations, Jin Yan, Thorsten Leist, Marion Bartsch, and Anette M. Karlsson
Investigating Isolated Neuromuscular Control Contributions to Non-Contact Anterior Cruciate Ligament Injury Risk via Computer Simulation Methods, Scott G. McLean, Xuemei Huang, and Antonie J. van den Bogert
Effect of Drop Height on Lower Extremity Biomechanical Measures in Female Athletes, Kevin R. Ford, Gregory D. Myer, Laura C. Schmitt, Antonie J. van den Bogert, and Timothy E. Hewett
Fatigue Life Prediction for Large-Diameter Elastically Constrained Ball Bearings, Jerzy T. Sawicki, Samuel A. Johansson, John H. Rumbarger, and Ronald B. Sharpless
A Weighted Least-Squares Method for Inverse Dynamic Analysis, Antonie J. van den Bogert and Anne Su
Mechanical Properties of a Reinforced Composite Polymer Electrolyte Membrane and its Simulated Performance in PEM Fuel Cells, Yaliang Tang, Ahmet Kusoglu, Anette M. Karlsson, Michael H. Santare, Simon Cleghorn, and William B. Johnson
Experimental and Computational Investigations of Separation and Transition on a Highly Loaded Low-Pressure Turbine Airfoil: Part 1 — Low Freestream Turbulence Intensity, Mounir B. Ibrahim, Olga Kartuzova, and Ralph J. Volino
Microfabrication of a Segmented-Involute-Foil Regenerator, Testing in a Sunpower Stirling Convertor, and Supporting Modeling and Analysis, Mounir B. Ibrahim, Roy C. Tew, David Gedeon, Gary Wood, and Jeffrey McLean
CFD Simulation of Jet Pulsation Effects on Film Cooling of Flat Plates, Olga Kartuzova, Daniel Danila, Mounir B. Ibrahim, and Ralph J. Volino
Investigation of Stress and Water Distribution in Membrane Electrode Assembly (MEA) During Fuel Cell Operation, Ahmet Kusoglu, Anette M. Karlsson, Michael Santare, Simon Cleghorn, and William B. Johnson
Multiplexed Predictive Control of a Large Commercial Turbofan Engine, Hanz Richter, Anil V. Singaraju, and Jonathan S. Litt
Jet Penetration Into a Scaled Microfabricated Stirling Cycle Regenerator, Liyong Sun, Terrence W. Simon, Susan C. Mantell, Mounir B. Ibrahim, David Gedeon, and Roy Tew
Creating a Reinforcement Learning Controller for Functional Electrical Stimulation of a Human Arm, Philip S. Thomas, Michael Branicky, Antonie van den Bogert, and Kathleen Jagodnik
Helical Axes of Skeletal Knee Joint Motion During Running, Antonie J. van den Bogert, C. Reinschmidt, and A. Lundberg
Experimental and Computational Investigations of Separation and Transition on a Highly Loaded Low-Pressure Turbine Airfoil: Part 2 — High Freestream Turbulence Intensity, Ralph J. Volino, Olga Kartuzova, and Mounir B. Ibrahim
Submissions from 2007
The Effect of Tibiofemoral Loading on Proximal Tibiofibular Joint Motion, Jacob Scott, Ho Lee, Wael Barsoum, and Antonie J. van den Bogert
On Internal Cone Cracks Induced by Conical Indentation in Brittle Materials, J. Yan, Anette M. Karlsson, and X. Chen
On the Reference Length and Mode Mixity for a Bimaterial Interface, A. Agrawal and Anette M. Karlsson
Multiaxial Thermo-Mechanical Fatigue on Material Systems for Gas Turbines, M. Bartsch, B. Baufeld, M. Henzelmann, Anette M. Karlsson, S. Dalkilic, and L. Chernova
VIBRATION BASED METHOD FOR SHAFT CRACK DETECTION, Zdzisław Gosiewski and Jerzy T. Sawicki
PATTERN RECOGNITION BASED SHAFT ANGLE ENCODER, Adam Pilat and Jerzy T. Sawicki
THE EFFECT OF STRUCTURAL DISTORTION ON THE FATIGUE LIFE OF LARGE-DIAMETER BALL BEARING, Jerzy T. Sawicki, Samuel A. Johansson, John H. Rumbarger, and Ronald B. Sharpless
Mechanical Behavior of Fuel Cell Membranes under Humidity Cycles and Effect of Swelling Anisotropy on the Fatigue Stresses, Ahmet Kusoglu, Anette M. Karlsson, Michael H. Santare, Simon Cleghorn, and William B. Johnson
Review of Rotordynamics, Jerzy T. Sawicki
Real-Time On-Line Space Research Laboratory Environment Monitoring With Off-Line Trend and Prediction Analysis, Kenol Jules and Paul P. Lin
Modeling and Performance Evaluation of Machining Spindle with Active Magnetic Bearings, Jerzy T. Sawicki, Eric H. Maslen, and Kenneth R. Bischof
Determining Plastic Properties of a Material with Residual Stress by Using Conical Indentation, J. Yan, Anette M. Karlsson, and X. Chen
Fatigue Life Prediction for Large-Diameter Elastically-Constrained Ball Bearings, Jerzy T. Sawicki, Samuel A. Johansson, John H. Rumbarger, and Ronald B. Sharpless
Rotordynamic Response and Identification of AMB Machining Spindle, Jerzy T. Sawicki and Eric H. Maslen
Determining Equi-Biaxial Residual Stress and Mechanical Properties From the Force-Displacement Curves of Conical Microindentation, J. Yan, X. Chen, and Anette M. Karlsson
Model-Based Estimation of Muscle Forces Exerted During Movements, Ahmet Erdemir, Scott McLean, Walter Herzog, and Antonie J. van den Bogert
Online Inspection for Glass Fiber Forming, Paul P. Lin, Qing Guo, and Xiaolong Li
A Microfabricated Segmented-Involute-Foil Regenerator for Enhancing Reliability and Performance of Stirling Engines: Phase II Final Report for the Radioisotope Power Conversion Technology NRA Contract NAS3-03124, Mounir B. Ibrahim, Daniel Danila, Terrence Simon, Susan Mantell, Liyong Sun, David Gedeon, Songgang Qiu, Gary Wood, Kevin Kelly, and Jeffrey McLean
A Microfabricated Involute-Foil Regenerator for Stirling Engines, Roy C. Tew, Mounir B. Ibrahim, Daniel Danila, Terrence W. Simon, Susan Mantell, Liyong Sun, David Gedeon, Kevin Kelly, Jeffrey McLean, Gary Wood, and Songgang Qiu
Time-Economic Lifetime Assessment for High Performance Thermal Barrier Coating Systems, Marion Bartsch, Bernd Baufeld, S. Dalkilic, Iulian Mircea, K. Lambrinou, T. Leist, J. Yan, and Anette M. Karlsson
The Response of Rotating Machines on Viscoelastic Supports, Michael I. Friswell, Jerzy T. Sawicki, D. J. Inman, and A. W. Lees
Modeling Failures of Thermal Barrier Coatings, Anette M. Karlsson
Robust Positively Invariant Cylinders in Constrained Variable Structure Control, Hanz Richter, Brian D. O'Dell, and Eduardo A. Misawa
Concurrent Simulations of Musculoskeletal Movements and Tissue Deformation, Antonie J. van den Bogert and Ahmet Erdemir
ACL Injuries: Do We Know the Mechanisms?, Antonie J. van den Bogert and Scott G. McLean
Submissions from 2006
A Simple Numerical Method of Cycle Jumps for Cyclically Loaded Structures, D. Cojocaru and Anette M. Karlsson
Mechanical Response of Fuel Cell Membranes Subjected to a Hygro-Thermal Cycle, Ahmet Kusoglu, Anette M. Karlsson, Michael H. Santare, Simon Cleghorn, and William B. Johnson
Evolution of Surface Morphology of Thermo-Mechanically Cycled NiCoCrAlY Bond Coats, J. Shi, Anette M. Karlsson, B. Baufeld, and M. Bartsch
Morphological Instabilities of Metallic Oxidation Protection Coatings for Gas Turbine Blades, Marion Bartsch, Bernd Baufeld, Jun Shi, and Anette M. Karlsson
Transient Response of Rotor on Rolling-Element Bearings with Clearance, David P. Fleming, Brian T. Murphy, Jerzy T. Sawicki, and J. V. Poplawski
An Initial Non-Equilibrium Porous-Media Model for CFD Simulation of Stirling Regenerators, Roy C. Tew, Terry Simon, David Gedeon, Mounir B. Ibrahim, and Wei Rong
The Response of Rotating Machines on Viscoelastic Supports, Michael Friswell, Jerzy T. Sawicki, Daniel Inman, and Arthur Lees
Obtaining Mode Mixity for a Bimaterial Interface Crack Using the Virtual Crack Closure Technique, A. Agrawal and Anette M. Karlsson
Boundary Layer Eigenvalues in SISO Discrete-Time Sliding Mode Control with Observer, Hanz Richter and Eduardo A. Misawa
Modeling Dynamics and Exploring Control of a Single-Wheeled Dynamically Stable Mobile Robot with Arms, Eric M. Schearer
Recent Advances in Vibration Based Damage Detection Techniques for Cracked Rotors, Jerzy T. Sawicki and George Y. Baaklini
An Initial Non-Equilibrium Porous-Media Model for CFD Simulation of Stirling Regenerators, Roy Tew, Terry Simon, David Gedeon, Mounir B. Ibrahim, and Wei Rong
An Experimental Investigation of Humidity and Temperature Effects on the Mechanical Properties of Persfluorosulfonic Acid Membrane, Y. L. Tang, Anette M. Karlsson, Michael H. Santare, Michael Gilbert, Simon Cleghorn, and William B. Johnson
Determination of Uniaxial Residual Stress and Mechanical Properties by Instrumented Indentation, Manhong Zhao, Xi Chen, Jin Yan, and Anette M. Karlsson
Stresses in Proton Exchange Membranes Due to Hygro-Thermal Loading, Yaliang Tang, Michael H. Santare, Anette M. Karlsson, Simon Cleghorn, and William B. Johnson
Rotor Fault Diagnosis Utilizing Active Magnetic Bearings, Jerzy T. Sawicki, Andrew L. Gyekenyesi, and George Y. Baaklini
Comment: Effect of Fatigue on Knee Kinetics and Kinematics in Stop-Jump Tasks, Antonie J. van den Bogert and Scott G. McLean
On the Determination of Residual Stress and Mechanical Properties by Indentation, Xi Chen, Jin Yan Yan, and Anette M. Karlsson
Crushing of a Textile Core Sandwich Panel, Justin Caulfield, Anette M. Karlsson, and David J. Sypeck
Numerical Study of Oscillatory Flow and Heat Transfer in an Isolated Gas Spring, Mounir B. Ibrahim and Zhiguo Zhang
Direct Measurements of Eddy Transport and Thermal Dispersion in a High Porosity Matrix, Yi Niu, Terry Simon, David Gedeon, and Mounir B. Ibrahim
Thermal Dispersion Within a Porous Medium Near a Solid Wall, Terrence W. Simon, G. McFadden, and Mounir B. Ibrahim
Development Methodology of Modeling Free Piston Engine and Its Components, Zhiguo Zhang and Mounir B. Ibrahim
Submissions from 2005
Effect of Gender on Lower Extremity Kinematics During Rapid Direction Changes: An Integrated Analysis of Three Sports Movements, S. G. McLean, K. B. Walker, and Antonie J. van den Bogert
Measurement of Interfacial Shear Mechanical Properties in Thermal Barrier Coating Systems by a Barb Pullout Method, S. Q. Guo, D. R. Mumm, Anette M. Karlsson, and Y. Kagawa
Letter to the Editor, Scott G. McLean, Jack T. Andrish, and Antonie J. van den Bogert
Association Between Lower Extremity Posture at Contact and Peak Knee Valgus Moment During Sidestepping: Implications for ACL Injury, Scott G. McLean, Xuemei M. Huang, and Antonie J. van den Bogert
Cavitation Effects on the Dynamics of Journal Bearings, Jerzy T. Sawicki
